Pressure gauge industry experts, the biggest pressure gauge manufacturers in China

Home > NEWS > Content
Stainless Steel Pressure Gauge The Role Of Earthquake
- Aug 16, 2017 -

Stainless steel pressure gauge dial diameter is that we can default to stainless steel pressure gauge shell diameter, generally more commonly used is 50 mm, 63 mm, Stainless Steel Pressure Gauge 100 mm and 160 mm (I are listed in European standards, China and other Some countries will be a bit different)

Stainless steel pressure gauge connection is divided into axial (back connection) and radial (bottom connection) two, but in reality, the customer can choose according to the specific circumstances of some options, if the panel is installed, the axial can be elected before Flange side or with a fixed bracket, Stainless Steel Pressure Gauge radial can be selected before the flange edge or fixed edge and so on.

Pressure gauge of the wet material is generally only two (standard), that is, copper alloy and 316 stainless steel, if you measure the media on these two does not apply or corrosion, then you can use the pressure gauge and chemical seal common use (chemical seal The effect of the pressure measurement element does not affect the measurement of the medium pressure in the case of effective measurement of the measurement medium and contact with the measurement element, Stainless Steel Pressure Gauge which play a protective measurement components, but also play a role in extending the measurement element).

There is a part of the user friends in the use of stainless steel pressure gauge in the process, found that the indicators of the instrument often frequent fluctuations in the problem. When we analyzed the problem, we learned that the original user in the installation of the instrument, Stainless Steel Pressure Gauge the stainless steel pressure gauge where the workplace vibration is relatively large, so this led to the instrument pointer also appeared frequent swing.

Stainless steel shock pressure gauge shell and the original are made of stainless steel, filled with silicone oil in the table, so that the pressure gauge pointer play a shock, the role of earthquake. Stainless Steel Pressure Gauge Stainless steel seismic pressure gauge that is seismic performance of the seismic performance, but also has a stainless steel pressure gauge corrosion resistance, Stainless Steel Pressure Gauge stainless steel seismic pressure gauge for industrial and mining site vibration is large, and the measured medium with corrosive occasions.

1. Instrument using the ambient temperature of -40 ~ 70 ℃, relative humidity of not more than 80%, Stainless Steel Pressure Gauge such as deviation from the normal use of temperature 20 5 ℃, the temperature should be included in the additional error.

    2. The instrument must be installed vertically, Stainless Steel Pressure Gauge and strive to maintain the same level with the measurement point, such as the difference is too high included in the liquid column caused by additional error, the measurement of gas may not need to be considered. The installation of the rear part of the case when the explosion-proof mouth block, so as not to affect the explosion-proof performance.

    3. Meter normal use of the measurement range: static pressure does not exceed the upper limit of measurement 3/4, in the fluctuation should not exceed the upper limit of the measurement 2/3. In the above two kinds of pressure conditions, the maximum pressure gauge should not be measured below the lower limit of 1/3, Stainless Steel Pressure Gauge vacuum measurement of vacuum when all the use.

    4. If you encounter the instrument pointer failure or internal parts loose, can not work properly, such as failure should be overhauled, or contact the manufacturer repair.

    5. Meter should avoid vibration and collision, so as not to damage.

    6. Please specify when ordering: instrument type and name; instrument measurement range; instrument accuracy level deviation from the packaging requirements and other.

    7. Stainless steel shock pressure gauge does not apply to the outside aerobic, chlorine, nitric acid and hydrogen chloride and other strong oxidant environment.